Work on your furniture first.
Remove all furniture and other objects and materials from the areas where the installation
will take place. Some installers will move your furniture, but there may be an additional
charge for doing so.
Before moving, you’ll also need to empty the contents of china cabinets, closets
and the like.
Be aware that the area of installation must be climate controlled (heated or air
conditioned). Indoor humidity should be maintained between 45-65%.
Now turn your attention to the old floor covering.
Please consider how your old floor covering will be taken up and disposed of. This
can be a time consuming task. We recommend that you check with us about the cost
and the method of disposal.
If you prefer to remove your present floor covering, do it at least one day prior
to arrival of your hardwood product to allow for cleanup and floor preparation.
If removing old carpet, please leave tack strips in place and pull the staples out
of the floor from the original pad.
Have a plan in mind regarding your trim.
You should know that, in many cases, moldings and baseboards need to be removed
for hardwood installation. Your installer may do this but at an additional charge
and they will probably not be responsible for damage or breakage due to dry or brittle
Painted baseboards, woodwork and paint may need retouching after the installation
is complete. If necessary, this is your responsibility.
The next subject: subflooring.
Your existing subfloor may need to be prepared to receive the hardwood, or a new
subfloor may be required. We suggest you discuss this with us and, if subfloor work
is necessary, that it be done by qualified professionals. It is important that the
subfloor be as clean and level as possible.
Doors require special consideration.
When hardwood is installed, there’s always the possibility that the doors,
especially closet doors, basement and bedroom doors, may not clear the new hardwood
and swing free.
Some installers will remove doors in order to install the hardwood and re-hang them
if possible. They probably won’t shave or cut down doors to insure clearance.
Please check with us regarding our policy. You may need to arrange for a qualified
carpenter to provide this service after the installation of your new hardwood floor.
Be clear about the clean-up.
Installing new hardwood will produce waste.
Usually these materials are collected by your installer and left at your trash collection
site. Check with us before the day of installation so you’re clear about the
clean up, if there are added costs to do so, and ask about the plan for hardwood
What to know and do during installation day
You need to be home on installation day.
Be prepared to be at home the day of installation and be available in case the installation
crew has questions. Your presence will insure that the correct hardwood is installed
in the right areas. Because it is difficult to estimate the length and circumstances
of each job, some installers may not be able to give you an exact time of arrival.
We will keep you informed on the schedule.
Your safety is our concern.
Your installers will use a variety of tools and techniques that can make the work
area hazardous. Please make sure that your children and pets are kept out of the
work area on installation day.
The walk-thru is an important step.
We recommend that, prior to the completion of the installation, you walk thru the
job with the chief installer. This will give you the opportunity to ask questions
and be clear on any final details.
What to know and do after installation day
Give your lungs a break.
If you are sensitive to dust and odors, good ventilation should be established for
48 to 72 hours after installation.
Being prepared for installation day through careful planning and smart preparing
will make your life and the installers a lot easier. It will also make your hardwood
flooring experience beautiful and enjoyable right from day one.